Certified Ladder Safety & Inspection Training Technician (IASHEP)
The purpose of this class is to teach the student how to properly use and inspect ladders. Regulatory Compliance This course gives references to state-specific regulations (if applicable), Fed/OSHA regulations 29 CFR 1926 Subpart X, and ANSI A14.1, A14.2, A14.5 standards. OSHA Training Requirement OSHA states 1926.1060(a): “The employer shall provide a training program for each employee using ladders and stairways, as necessary. The program shall enable each employee to recognize hazards related to ladders and stairways, and shall train each employee in the procedures to be followed to minimize these hazards.” Program Agenda Inspection Guidelines Checklists Ladder Safety Procedures Definitions ANSI Standard Ladder Specifications Properties of Wood Wood Ladder Inspections Wood Ladder Inspection Checklist Metal Ladder Inspection Checklist Fiberglass Ladder Inspection Checklist Storage and Transport of Ladders Use of Ladders Ladder Reference Guides
Course Description
The purpose of this class is to teach the student how to properly use and inspect ladders.
Regulatory Compliance This course gives references to state-specific regulations (if applicable), Fed/OSHA regulations 29 CFR 1926 Subpart X, and ANSI A14.1, A14.2, A14.5 standards.
OSHA Training Requirement OSHA states 1926.1060(a): “The employer shall provide a training program for each employee using ladders and stairways, as necessary. The program shall enable each employee to recognize hazards related to ladders and stairways, and shall train each employee in the procedures to be followed to minimize these hazards.”
Program Agenda
Inspection Guidelines
Checklists
Ladder Safety Procedures
Definitions
ANSI Standard Ladder Specifications
Properties of Wood
Wood Ladder Inspections
Wood Ladder Inspection Checklist
Metal Ladder Inspection Checklist
Fiberglass Ladder Inspection Checklist
Storage and Transport of Ladders
Use of Ladders
Ladder Reference Guides
Learning Objectives
Upon completion of this course, participants will be able to: Identify common ladder hazards and understand OSHA ladder safety requirements. Select the correct type of ladder for specific workplace tasks and environments. Demonstrate proper ladder setup, usage techniques, and safe climbing practices. Conduct ladder inspections and recognize damage, defects, and conditions that require removal from service.
Who Should Attend
General Industry and Construction Managers & Workers Building Contractors Safety, Health, and Environmental Professionals Site Safety Committees Building Inspectors Training Managers Industrial Hygienists
Certified Ladder Safety & Inspection Training Technician (IASHEP)
Blueprint & Examination Guide
1. Overview
The Certified Ladder Safety & Inspection Training Technician (IASHEP) is an advanced certification designed to validate a professional's expertise in the respective field. This program covers essential principles, regulatory standards, and practical applications to ensure candidates are fully equipped to handle safety, compliance, and operational challenges.
2. Examination Parameters
| Criteria | Details |
|---|---|
| Total Questions | 100 |
| Question Format | Multiple Choice |
| Passing Score | 70% |
| Time Limit | 2 Hours |
| Delivery Method | Online Proctored / In-Person |
3. Prerequisites & Qualifications
Candidates must meet the following criteria before taking the examination:
- A minimum of 3 years of verifiable experience in the relevant field.
- Completion of an accredited training program related to the course.
- Current certification in First Aid/CPR (where applicable).
- A bachelor’s degree in engineering or a related field is recommended but not required.
- Commitment to adhering to safety and regulatory standards.
4. Examination Domains
The examination is divided into the following core domains:
| Main Topic | Weightage | Number of Questions |
|---|---|---|
| Domain 1: Regulatory Requirements & Standards | 25% | 25 |
| Domain 2: Risk Assessment & Hazard Analysis | 20% | 20 |
| Domain 3: Safe Work Practices & PPE | 20% | 20 |
| Domain 4: Training & Incident Investigation | 20% | 20 |
| Domain 5: Compliance & Program Management | 15% | 15 |
5. Domain Breakdowns
Domain 1: Regulatory Requirements & Standards
Weight: 25%Candidates must understand the core principles of regulatory standards and their practical application in the workplace.
- Identify applicable safety and regulatory standards.
- Understand the hierarchy of safety controls.
- Implement standard compliance requirements.
- Demonstrate knowledge of relevant codes and annexes.
Domain 2: Risk Assessment & Hazard Analysis
Weight: 20%Candidates must be able to perform risk assessments and identify potential hazards.
- Conduct comprehensive risk assessments.
- Identify workplace hazards and potential risks.
- Determine the likelihood and severity of incidents.
- Implement effective risk mitigation strategies.
Domain 3: Safe Work Practices & PPE
Weight: 20%Candidates must demonstrate knowledge of safe work practices and the proper use of Personal Protective Equipment (PPE).
- Select and inspect appropriate PPE.
- Implement safe work procedures and protocols.
- Understand lockout/tagout and energy control procedures.
- Maintain a safe working environment.
Domain 4: Training & Incident Investigation
Weight: 20%Candidates must be able to develop training programs and investigate incidents effectively.
- Develop and deliver effective safety training.
- Investigate incidents and identify root causes.
- Document findings and implement corrective actions.
- Promote a culture of safety within the organization.
Domain 5: Compliance & Program Management
Weight: 15%Candidates must understand how to manage compliance programs and ensure ongoing adherence to standards.
- Develop and manage compliance programs.
- Conduct audits and inspections.
- Ensure continuous improvement in safety practices.
- Maintain accurate records and documentation.
6. Additional Information
- Recertification is required every 3 years.
- Candidates will receive a digital badge upon successful completion.
- Exam study materials and preparatory guides are available upon registration.
- For special accommodations, please contact our support team at least 2 weeks prior to the exam.
Related Courses
Looking for Expert Safety Guidance?
Our team of certified safety professionals provides comprehensive safety solutions tailored to your specific needs. From risk assessments to compliance training, we're here to help you create a safer workplace.